Vertical multistage centrifugal pump in
AS+ASH is the same flow vertical multistage pump to be series connected to be a high pressure pump system,it is widely used for building and industry booster system which needs high pressure application.The pipeline structure of the pump set can ensure that the pump is directly installed in the horizontal pipeline system with the same pipe diameter in and out of the same horizontal line.
SEE DETAILSStainless steel submersible borehole dee
Electric Submersible Deep Well Pump are fitted with a permanent magnet, brushless motor, Which enables the efficient use of energy from a wide range of supply options.The pump system offers the perfect water supply solution in remote areas where water is scarce and the power supply is non-existent or unreliable. The structure of motor with double shields poses no pollution risk to drinking water. The integrated control system is built inside the motor to make it more compatible and reliable, while offering the MPPT function-Maximum Power Point Tracking, maximizing the utilization of power generated from the photovoltaic generator.
SEE DETAILSSingle-stage double suction Split Case C
Double Suction Horizontal Split Case Pump, for conveying temperature not more than 80℃ below the clear water and other liquids similar to water physical and chemical properties of use. By changing the material of impeller, sealing ring and shaft sleeve, muddy water containing sediment can be absorbed. The shaft seal of the pump generally adopts soft packing. Mechanical seal can also be installed if there is special requirement.
SEE DETAILSHorizontal Water Booster Pump
CHLF, CHL, CHM, CHLF(T) are non-self-priming light horizontal multistage centrifugal pump. They are efficient, low noise, little corrosive tolerance, compact structure, good looking, small volume, light weight, etc.
SEE DETAILSHSC pulp pump
HSC serious pump is mounted with the open-impeller design,it is characterized by low axial thrust. With its open channels, it is suitable for conveying many different media.
SEE DETAILSISO2858/5199 chemical pump SMA
SMA series bareshaft end suction pump is designed and manufactured according to ISO 2858 and ISO 5199 standards, enables the pump be interchangeable with other similar ISO 2858 and ISO 5199 standardized pumps. Modular design and high standardization of the common parts simplifies spare parts storage, improves pump stability and reduces the pump operation and maintenance cost.
SEE DETAILSEN733 End Suction centrifugal Pump NESO
NESO series pump is a kind of horizontal single-stage, end suction centrifugal pump, which is designed & manufactured according to EN733/DIN24255 standard. This standard covers both performance and dimensions. Available pump discharge size is from 32mm to 250mm, working pressure is up to 16 BAR. The volute pump casing is fitted with replaceable wear ring and has a suction vane to give smooth flow into the double shrouded hydraulically balanced impeller. Pump is made in cast iron as standard, other materials are also on options. Its “Back Pull Out” design allows the removal of the complete rotating element without disturbing the pipework. This feature enables quick and easy maintenance. This series pump is long coupled model, fitted with IEC standard electric motor on a baseplate though
SEE DETAILSLight stainless steel vertical pump with
E-pump is a pump with cable box mounted controller with VFD function. With help of controller, it works more intelligent, and ECO efficiency. It allows max 6 pumps to assemble pump station without traditional control cabinet!
SEE DETAILSIn-line pump TD E
E-pump is a pump with cable box mounted VFD controller . With help of controller, it works more intelligent, and ECO efficiency. It allows max 6 pumps to assemble pump station without traditional control cabinet!
SEE DETAILS